2025 Chevrolet Blazer near Fort Bragg, NC

The passenger compartment is engineered to support seating comfort without sacrificing cargo usability. Headroom measures up to 39.8 inches in the front and 38.6 inches in the rear when the vehicle is equipped without a sunroof. With a sunroof, those measurements adjust to 38 inches in the front and 36.8 inches in the rear. Front legroom measures 41 inches, while rear legroom reaches 39.6 inches.

Shoulder room is 59.1 inches in the front row and 58.6 inches in the rear. The hip room measures 55.6 inches in the front and 54.2 inches in the rear. Total passenger volume is 107.8 cubic feet, supporting a layout that balances personal space and utility.

This interior geometry allows occupants to sit comfortably for extended durations while also accommodating varying body sizes. It reflects a measured approach to space utilization, aligned with standard midsize SUV proportions.

The 2025 Chevrolet Blazer incorporates multiple standard safety measures, including a comprehensive airbag system with frontal, seat-mounted side-impact, knee, and head-curtain airbags. These are positioned for both front and rear outboard seating positions. The system includes a Passenger Sensing System to optimize deployment based on seat occupancy.

Chevy Safety Assist is included across all trims. This suite features Automatic Emergency Braking, Lane Keep Assist with Lane Departure Warning, Forward Collision Alert, Front Pedestrian Braking, IntelliBeam® auto high beams, and a Following Distance Indicator. These systems operate through a series of sensors and controllers to mitigate potential collisions and support driver awareness.

The optional Driver Confidence II Package, available on RS and Premier trims, includes HD Surround Vision, Adaptive Cruise Control, Enhanced Automatic Emergency Braking, a Rear Camera Mirror, and a Safety Alert Seat. The combination of these systems enhances visual coverage and assists in both low-speed and highway driving conditions.

A Tire Pressure Monitoring System with Tire Fill Alert is also included, supporting basic maintenance and operational safety.

The 2025 Chevrolet Blazer is powered by two engine types configured to deliver both efficiency and performance consistency. The base 2.0L turbocharged inline-4 features direct injection and a dual overhead camshaft valvetrain. Constructed with a high-pressure die-cast aluminum block and cast aluminum cylinder heads, this engine includes cast-in-place liners for durability. It generates 228 horsepower at 5,000 rpm and 258 lb-ft of torque between 1,500 and 4,000 rpm. This low-end torque range supports early throttle response and stable acceleration.

For drivers requiring increased power output, the available 3.6L V6 engine uses a similar dual overhead camshaft setup with continuously variable valve timing. It delivers 308 horsepower at 6,700 rpm and 270 lb-ft of torque at 5,000 rpm. With a cast aluminum block and cast-in-place iron bore liners, the engine maintains thermal stability and mechanical strength under extended use. High-pressure direct fuel injection is standard across both engines, supporting efficient combustion cycles and throttle control.

Both engine variants include automatic stop/start functionality to reduce fuel use during idling. The electronic throttle control system enables consistent pedal feedback and refined acceleration characteristics.

The 2.0L turbo engine of the 2025 Chevrolet Blazer is paired with the nine-speed automatic transmission. The 3.6L engine connects to the nine-speed transmission. Both units include gear ratios designed to maintain smooth torque distribution through each acceleration phase. Final drive ratios are 3.47 for the 2.0L configuration and 3.49 for the 3.6L, delivering appropriate torque multiplication based on the selected engine.

This transmission setup facilitates low-rpm cruising while preserving immediate response under moderate and heavy throttle applications. Gear changes occur with minimal interruption, supporting consistent drive quality across terrains.

The 2025 Chevrolet Blazer rides on a 113-inch wheelbase, offering a structural base that supports even weight distribution and interior volume. Its overall length measures 191.8 inches, with a width of 76.7 inches and a height of 67 inches. Track widths measure 66.4 inches in the front and 66.2 inches in the rear. These dimensions contribute to a balanced stance and effective road grip.

The front suspension consists of a MacPherson® strut independent design, incorporating hydraulic control arm ride bushings and a hollow stabilizer bar. The rear suspension adopts a five-link independent system with a hollow stabilizer bar as well. This combination supports both comfort and rigidity under cornering and uneven road conditions.

Electric variable-effort power steering with Active Return Assist maintains predictable control. The turning circle is 38.7 feet, offering reasonable maneuverability in confined urban spaces. The braking system includes four-wheel disc brakes with power assist, variable brake application, and low-drag calipers. Duralife brake rotors measure 12.64 inches in the front and 12.40 inches in the rear, offering consistent heat dispersion and fade resistance.